What’s new in BumpMesh

Every update announced in the app’s What’s New popup, from the first list in April 2026 to today. Releases have had version numbers since July 2026.

  1. v1.5.2

    Textures up to the edge, Outline wrap

    • Where a textured face meets an untextured one on a sharp edge, the texture now keeps its full height right up to the edge instead of sloping down to it. The untextured face grows to meet it and stays flat. This also applies where walls meet the untextured bottom.
    • Outline wrap projection: wraps the texture along the part’s outline around Z, so a pattern keeps its size around the corners of box-like parts and closes without a seam. Thanks to Michail Yasonik.
    • Rotate side faces around Z (Triplanar and Cubic): the Rotation turns the side projections around the vertical axis, so a directional pattern like wood grain runs the same way on top and side faces. Thanks to Vladyslav Kovalenko.
    • An output resolution you set yourself now carries over when you load the next model. Thanks to Vladyslav Kovalenko.
    • 3Dconnexion SpaceMouse: the model now follows the cap on every axis (left/right pan and tilt were reversed), and a SpaceMouse button in the bottom bar sets the speed and reverses single axes.
    • Czech translation, thanks to Peter K.
  2. v1.5.1

    Steadier brush strokes

    • Tapping another mouse button during a brush stroke no longer ends the stroke and turns the rest of the drag into a camera orbit. The stroke carries on until you release the left button.
    • Switching between Include and Exclude now keeps the tool you were using, instead of swapping your brush for the fill tool. The switch still clears the layer’s paint, as before.
  3. v1.5.0

    Stamp mode

    • Stamp mode, under Projection, places a texture once instead of tiling it, for logos, badges and labels. Turn it on and click the model to position the stamp; drag it to move it, and scroll right after to resize it. Size U and V set its size, and Rotation turns it.
    • The new Surface normal projection, the default for stamps, lays the stamp flat on the surface under it, even on slopes and curves, and follows the surface as you drag. At an edge it stops instead of flipping onto the next face. Planar and Cylindrical can stamp too.
    • Only the surface facing the stamp gets it, not the parts hidden behind it. Smooth Mask fades the stamp’s border.
    • Exports refine only the faces the stamp touches, so they finish faster, and with Preserve Untextured (on by default) the rest of the model keeps its original triangles.
  4. v1.4.3

    Tire treads

    • A new Tires category in the Texture Gallery with five treads: Touring, Mud-Terrain, Truck Rib, Tractor and Loader.
    • One tile spans the full tread width, with whole tread pitches around the tire. On a tire lying flat, use Cylindrical mapping, unlock the size lock and set Size V to the tire’s width to land the tread shoulder to shoulder.
    • This changelog, linked from the What’s New popup, lists every update since April 2026.
    • A few labels that showed garbled characters, such as the X°, Y° and Z° rotation fields, read correctly again.
  5. v1.4.2

    SpaceMouse support and a Standard circle brush

    • 3Dconnexion SpaceMouse support, thanks to Alon Mishne: push or pull the puck to zoom, slide it to pan, tilt and twist it to orbit. In Chrome and Edge, it connects once you touch the puck.
    • The circle brush has a Mode again: Standard marks every whole triangle it touches and highlights them as you hover, a quick way to select the flat faces of a CAD model, while Precision (the default) follows the brush outline exactly with an optional soft edge.
    • In the default parallel view, the brush now stays a true circle away from the middle of the screen.
  6. v1.4.1

    Surface masks survive project import

    • Surface masks come back with your project. A painted mask could be missing after loading a saved project: projects saved before v1.4.0 lost it, and on some meshes the re-imported model no longer lined up with the saved paint. Both are fixed.
    • A mask now also follows the model through rotation.
    • If a mask ever can’t be matched to its model, BumpMesh says so instead of quietly loading without it.
  7. v1.4.0

    Texture layers and a self-refining brush

    • Texture layers put several textures on one model: Add layer (top of the sidebar) gives you a layer with its own texture, size, height and surface. Click a layer to edit it, hide it, or let it add its relief to the layers below instead of covering them.
    • A new layer starts empty, so just fill or paint the surfaces it should cover. Layers and paint are saved in your project files.
    • The circle brush is now the default tool, with a soft edge, and refines the mesh under your stroke by itself, so strokes and soft edges are just as fine on a plain cube as on a scan. The Precision toggle is gone, and undo works through every stroke.
    • Clean sharp edges — textures on sharp edges, like a cube’s, now meet cleanly at the corner instead of leaving a notched groove.
  8. v1.3.8

    Section View and Molded textures

    • Section View (bottom of the viewport) cuts your model open, so you can see which inner surfaces — holes, cavities, the inside of hollow parts — get textured, and mask them right through the cut. Drag the arrow to move the cut and the rings to tilt it (they step aside while you paint), or snap it with X, Y and Z.
    • A new Molded texture category with eight mold grains: Sand Matte, Spark Erosion, Fine Stipple, Concrete, Fine Leather, Haircell, Brushed and Hammered.
    • Calmer touch controls — resting or tapping fingers no longer nudge the view.
  9. v1.3.7

    Finnish and Dutch

    • BumpMesh now speaks Finnish and Dutch, thanks to community translators, and the Russian translation got a round of polish.
    • The language menu is now sorted by each language’s own name, and Polish is listed as “Polski”.
  10. v1.3.6

    Better on phones and tablets

    • The arrow on the sidebar’s edge hides the sidebar so your model gets the whole screen, and brings it back.
    • On a phone held upright, the model now sits above the settings.
    • Opening the Texture Gallery no longer pops up the on-screen keyboard or leaves the page stuck.
  11. v1.3.5

    A sharper 3D Preview

    • The 3D Preview now follows your Resolution setting, so fine textures show their real shape instead of a blurred approximation.
    • It builds in the background, so the app stays responsive while a spinner shows next to the checkbox, and it rebuilds automatically when you change the resolution.
  12. v1.3.4

    Japandi textures

    • Seven Japandi textures: Classic Flutes, Fine Ribs, Wavy Reeds, Sazanami Ripples, Sazanami S-Wave, Tachiwaki and Bamboo Culms. Their lines run vertically, so with Cylindrical mapping they wrap a vase as flutes and ripples.
    • Textures made with Filter Forge now carry an FF badge in the gallery.
  13. v1.3.3

    Invert texture

    • The new Invert texture option swaps black and white in the map, so dark areas are raised, without editing the image. The old “Invert” under Texture Depth is now called “Reverse direction”.
    • A texture picked in the Texture Gallery also shows up among your favorites in the panel.
    • Large 3MF exports use less memory.
    • Every language is now fully translated.
  14. v1.3.2

    Try textures live from the gallery

    • The Texture Gallery now opens beside your model, so you can click or arrow-key through textures and see each one live; turn on Turntable to spin the model while you browse.
    • Maps you upload are kept under “Your textures” in this browser.
    • ideaMaker textures — load .texture files from the ideaMaker texture library directly with Upload custom map.
    • Three new stone textures: Cobblestone, Flagstone and Square Setts.
    • Exporting large models uses about half the memory.
    • Drag the sidebar’s edge to make it wider. Later replaced by the collapsible sidebar in v1.3.6.
  15. v1.3.1

    Fixes

    • Custom textures now load at up to 2048 px instead of 512, so high-res heightmaps stay sharp.
    • No more faceted “crystal” spots on fillets and rounded edges.
    • Bottom faces = 0 really textures the bed face.
    • No false mesh warnings for multi-part files or tiny CAD edges.
    • Clear messages for unsupported files.
    • Firefox slider layout fixed.
  16. v1.3.0

    54 new textures and the Texture Gallery

    • New textures & Texture Gallery — 54 new textures, from knurling and carbon twill to chainmail, bark and dozens of Hero Patterns. Browse them all in the new Texture Gallery with search and categories, and star your favorites to pin them to the panel.
    • Smooth masking brush — the circle brush now has a Hardness setting: lower it to fade the mask out toward the brush rim for soft, gradual texture borders instead of hard triangle edges. Enable Precision for smooth gradients on coarse meshes. Since v1.4.0 the brush refines the mesh by itself, and the Precision toggle is gone.
  17. v1.2.0

    STEP import

    • STEP import — load CAD files (.step / .stp) directly: they’re converted to a mesh right in your browser by our new open-source meshStep library, with coarse / standard / fine quality presets.
    • Smooth Mask transitions — choose how the texture fades out at masked boundaries: Linear, S-Curve, or the new default Ease-In for a gentler blend at the mask edge.
    • Texture size in millimeters — the texture scale controls now set the tile size as absolute values in mm instead of relative to the model, so the same settings give the same physical texture on any model.
  18. The performance release

    • Massive performance boost — the whole export pipeline was rebuilt: exports now run about 3× faster and use 70% less memory, so much larger models fit in your browser.
    • Exports run in the background — the app stays fully responsive while exporting, processing starts the instant you click Export, and switching tabs no longer slows it down.
    • Higher resolution ceiling — the subdivision safety cap doubles to 32M triangles on machines with 8 GB+ RAM.
    • Cleaner meshes — fixed a bug where “Snap near-bottom vertices” could fold geometry into the bottom plane (non-manifold edges / phantom shells), plus fewer mesh defects from decimation overall.
    • Optimized decimation — smarter triangle reduction that harvests flat faces for lighter meshes while keeping exports watertight.
    • More intuitive resolution slider — reworked to make dialing in the output detail clearer and easier.
  19. Mesh regularization

    • Mesh regularization — collapses sliver triangles from CAD tessellation so each output triangle samples the texture coherently. Toggle under Advanced / Beta Features. Removed again in July 2026.
  20. Mesh Check, undo/redo and project files

    • Bake Textures (beta) — apply the current texture and continue editing on the textured mesh. Find it under Advanced / Beta Features.
    • Significantly improved cylindrical mapping workflow, with an adjustable cylinder center and radius.
    • Part rotation gizmo to rotate your model around X, Y and Z. Since July 2026, exports keep your model’s original position and orientation; rotating only helps you place the texture.
    • Mesh Check flags open edges, non-manifold edges and other defects in your model before you texture it.
    • Undo / redo with full keyboard shortcuts.
    • Save & load projects as .bumpmesh files.
    • Smooth masking borders — the texture fades out gradually near masked boundaries instead of ending in a hard step.
    • New languages: Italian, Spanish, Portuguese, Japanese, French, Korean.
    • Lots of performance and quality-of-life improvements.